Zeoss-900
MODEL | ZEOSS-900 | |
Internal Dimension (mm) | Width | 750 |
Depth | 800 | |
Height | 1720 | |
External Dimensions (mm) | Width | 830 |
Depth | 895 | |
Height | 2150 | |
Power | 1500W | |
Capacity | 1032 LT | |
Voltage | 110V - 220V | |
Amperage | 10A | |
EO Gas Gr | 18 gr, 20 gr, 22 gr | |
Sterilization Bag | 60x90 cm |
Advantages of the new generation Gas Diffusion System Gas Sterilizers which consider user safety important;
- Practical Usage/Operation.
- Large usage capacity.
- Low gas consumption: Consumes 1/10 less gas compared to the equivalent systems.
- Environmental pollution is decreased to the possible minimum level due to the low gas consumption.
- Negative pressure.
- Micro Computer Operating System.
- Aeration after sterilization is executed in the same cabin.
- EO gas is released into the atmosphere below the values of AAMI standards by means of Scrubber filter.
- Neutralizer (Optional) neutralizes Ethylene Oxide gas.
- Service by way of remote connection.
- 100 % elimination of ethylene oxide residues by means of vacuum pump system.
- Conformity to the ISO 14937 Standards.
- Temperature Measurement Data Information
- Humidity Measurement Data Information
- Pressure Measurement Data Information
- Gas Data Information
- Sterilization cycle record (every 5 seconds)
- Transfer of the sterilization cycle data to the computer.
- Graphical printout of the sterilization temperature and humidity values.
- Reference Sterilization Bag.
The products which can be sterilized at between 37 °C to 54 °C with ZEOSS series EO New Generation Gaz Diffusion system Flexible Chamber Technology are;
- All materials resistant or non-resistant to heat
- Plastic Materials
- Rubber Materials
- Metals
- Mechanic and electro-mechanic parts
- Medical Materials
- Labortory Materials
- Laparascopic Equipment
- Endoscopic Equipment
- Standard Program : 8 hours at 54°C mode.
- Short Program : 4 hours at 54°C
- Long Program : 16 hours at 54°C mode.
- Sterilization period adjustments of all touchscreen models can made at different optional values.
- Time, resistance, fan and vacuum phases are monitored by means of LCD display available on Touchscreen Models.
- Operation cycles are monitored and confirmed by means of digital resistance, fan and vacuum LED lights available on LCD display.
- Indicator and analog LED lights on printer.